[email protected]

4841 Davenport Place, Fremont, CA 94538

Stainless and Aluminum Angle and Inline valve
Our valves are uniquely designed for:

– Long Cycle life
– High conductance
– Best value
– KF, ISO, CF flange configuration
– Size from 0.5″ to 25″
– Leak rate to 2×10-10 standard cc/sec, He

These valves are designed for 3 million cycles with warranty of 1.5 million cycles (or 12 months). Valve body is made of 304 stainless steel. Welded bellows are made of AM350 for long life. To enable long lasting seal life, actuator housings are machined and honed to micron precision so that O-Ring wear is minimized — contrary to traditional tube-housing which are neither round nor straight. Pneumatic valves from 16mm to 50mm are normally closed (spring close). Size above 63mm are double acting (air-open / air-close). Optional “pneumatic lock” is available.

Options:
– Custom configuration
– Solenoid valve
– Reed Switch Position sensor
– Special o-ring such as Kalrez
– Heating jacket

Core Competencies
– Application expertise
– Strong engineering R &D
– Superior product offering
– System level know-how

Specification

Vacuum range1 x 10-9 Torr
Leak test1 x 10-9 std cc/sec He
Bake temperature120 degree C
MTTF (life)1.5 million cycle
Time from open-close<0.5 sec
Operating temperature20 C to 90 C
Differential pressure15 psi
Position indicator24 VDC or 120 VAC
Operating pressure60 — 95 psi

Stainless CF Angle & Inline valve- HV

Cycle lift of 1.5 million
High Vacuum – O-ring at Bonnet seal

Pneumatic Angle Valve-CF Flange

Manual Angle Valve-CF Flange

Pneumatic In-Line Valve-CF Flange

Manual In-Line Valve-CF Flange

Stainless CF Angle & Inline valve- UHV

Cycle lift of 1.5 million
Ultra High Vacuum – Copper Gasket at Bonnet seal

Pneumatic Angle Valve-CF Flange

Manual Angle Valve-CF Flange

Pneumatic In-Line Valve-CF Flange

Manual In-Line Valve-CF Flange

Aluminum Block valve

-One Piece, compact design
-Low particle, formed bellow assembly
-Right angle or inline configuration

Body is machined from a single piece 6061-T6 aluminum billet.
There is no seam, virtual leak is eliminated and flow path is extremely smooth.
Aluminum has high fluorine resistance and excellent thermal conductivity, a great choice for CVD application. Its transparency to X-Ray makes it suitable for high energy research.
Solenoid is an optional item, in 24 VDC or 120 VAC.

Manual Alum. Block Valve